|
| CAT. NO. |
REFERENCE
DIMENSIONS |
INC. |
RANGE |
| D |
L |
a° |
THD.
mm |
| SD125R |
18mm
.709 |
60mm
2.362 |
30° |
18
x 1 |
1/64
.001 |
1/16
– 1/2
.030 – .500 |
| TD25-NS |
28mm
1.102 |
82mm
3.228 |
16° |
25
x 1 |
1/32
.001 |
1/8
– 3/4
.100 – .781 |
| CD25 |
34mm
1.339 |
87.5mm
3.445 |
10° |
34
x 1 |
1/16
.001 |
3/16
– 1 in.
.200 – 1.000 |
| TD32S |
42mm
1.654 |
82mm
3.228 |
16° |
40
x 1 |
1/16
.001 |
1/4
– 1-1/4
.200 – 1.250 |
|
|
| NOTE: Generally, guide bushings are
used in stationary or revolving guide bushing holders. For
profile material, revolving bushings are essential. However,
in special cases where round stock is turned in revolving
bushings and extreme concentricity between the stock and
the turned diameters is required, extra precision (XP) bushings
are available. These bushings command higher prices, longer
deliveries, and should only be specified when the requirements
justify their use. |
 |
| CAT. NO. |
INC. |
RANGE |
| SD125RHX |
1/32 |
1/8
– 7/16 |
| TD25-NSHX |
1/16 |
3/16
– 11/16 |
| CD25HX |
1/16 |
1/4
– 3/4 |
| TD32SHX |
1/16 |
1/4
– 1 1/16 |
|
| CAT. NO. |
INC. |
RANGE |
| SD125RSQ |
1/32 |
1/8 – 11/32 |
| TD25-NSSQ |
1/16 |
3/16 – 9/16 |
| CD25SQ |
1/16 |
1/4 – 11/16 |
| TD32SSQ |
1/16 |
1/4 – 7/8 |
|
|
|
Hexagon and square collets and bushings are normally
stocked in the increments (INC) listed. Odd size hexagon
and square bores and other profile shapes are made to
order. In these cases, it is requested that a stock sample
be sent with the purchase order.
|
 |
| CAT. NO. |
INC. |
RANGE |
| SD125R |
1/16
.001 |
1/16 – 1/2
.050 – .500 |
| TD25-NS |
1/16
.001 |
1/8 – 3/4
.050 – .796 |
| CD25 |
1/16
.001 |
3/16 – 1 in.
.100 – 1.000 |
| TD32S |
1/16
.001 |
1/4 – 1-1/4
.200 – 1.250 |
|
|
|
NOTE: Meehanite is compatible with
most materials, including those which have a high tendency
to “pick up”. However, meehanite has a wear
life that is considerably shorter than that of carbide.
Meehanite is supplied in round bore sizes only.
* When ordering please add a suffix of “ST”
for steel bushing or “M” for meehanite bushing.
|
