Multi-Purpose (MPC) Nuts & Wrenches
Collet Installation
|
NUTS
|
WRENCHES | ||
|---|---|---|---|
| CAT. NO. | NUT OD | THREAD | CAT. NO. |
| CY 8-N-M | 12 | M10x .75 | CY 8-W-M |
| CY11-N-M | 16 | M13x .75 | CY11-W-M |
| CY11-N-H | 19 | M14x .75 | CY11-W-H |
| CY12-N-H | 19 | M14x .75 | CY12-W-H |
| CY16-N-M | 22 | M19x1.00 | CY16-W-M |
| CY16-N-H | 28 | M22x1.50 | CY16-W-H |
| CY16-N-S | 32 | M22x1.50 | CY16-W-S |
| CY20-N-M | 28 | M24x1.00 | CY20-W-M |
| CY20-N-H | 34 | M25x1.50 | CY20-W-H |
| CY20-N-S | 35 | M25x1.50 | CY20-W-S |
| CY25-N-S | 42 | M32x1.50 | CY25-W-S |
| CY32-N-S | 50 | M40x1.50 | CY32-W-S |
| CY40-N-S | 63 | M50x1.50 | CY40-W-S |
1. Insert the collet into the nut at an angle (as shown) and engage the protruding section of the eccentric extraction ring into the groove of the collet.
2. With the collet parallel to the nut check to make sure the collet groove is being held in place by the extraction ring.
3. Insert the collet and nut assembly into the collet holder and take a few turns on the nut.
4. Insert the tool to be gripped and tighten the nut.
5. To release the collet, unscrew the nut.
Click here for Multi Purpose Collet (MPC) Nut and Wrench information and pricing!